资源类型

期刊论文 49

年份

2023 3

2022 8

2021 3

2020 4

2019 4

2018 1

2017 3

2016 1

2014 1

2012 1

2011 1

2010 2

2009 1

2008 3

2007 3

2005 1

2003 2

2001 1

2000 1

展开 ︾

关键词

三点弯曲梁 2

弯曲正应力 2

整体穿刺 2

三维有限元 1

优化 1

伸长断裂 1

内衬混凝土 1

剪切和弯曲的共同作用 1

剪切应力 1

单层梁理论 1

厚板 1

厚板壳 1

双K断裂参数 1

夹层梁 1

弯曲 1

弯曲伸长 1

弯曲特性 1

弯曲结构表面；柔性加速度计；微机电系统（MEMS）技术；无线非接触式测量 1

抗弯刚度 1

展开 ︾

检索范围：

排序： 展示方式：

Improved prediction of pile bending moment and deflection due to adjacent braced excavation

《结构与土木工程前沿（英文）》 doi: 10.1007/s11709-023-0961-2

摘要： Deep excavations in dense urban areas have caused damage to nearby existing structures in numerous past construction cases. Proper assessment is crucial in the initial design stages. This study develops equations to predict the existing pile bending moment and deflection produced by adjacent braced excavations. Influential parameters (i.e., the excavation geometry, diaphragm wall thickness, pile geometry, strength and small-strain stiffness of the soil, and soft clay thickness) were considered and employed in the developed equations. It is practically unfeasible to obtain measurement data; hence, artificial data for the bending moment and deflection of existing piles were produced from well-calibrated numerical analyses of hypothetical cases, using the three-dimensional finite element method. The developed equations were established through a multiple linear regression analysis of the artificial data, using the transformation technique. In addition, the three-dimensional nature of the excavation work was characterized by considering the excavation corner effect, using the plane strain ratio parameter. The estimation results of the developed equations can provide satisfactory pile bending moment and deflection data and are more accurate than those found in previous studies.

关键词： pile responses     excavation     prediction     deflection     bending moments    

HTML PDF 收藏

Bending and vibration of a discontinuous beam with a curvic coupling under different axial forces

Heng LIU, Jie HONG, Dayi ZHANG

《机械工程前沿（英文）》 2020年 第15卷 第3期   页码 417-429 doi: 10.1007/s11465-019-0584-4

摘要： The transverse stiffness and vibration characteristics of discontinuous beams can significantly differ from those of continuous beams given that an abrupt change in stiffness may occur at the interface of the former. In this study, the equations for the deflection curve and vibration frequencies of a simply supported discontinuous beam under axial loads are derived analytically on the basis of boundary, continuity, and deformation compatibility conditions by using equivalent spring models. The equation for the deflection curve is solved using undetermined coefficient methods. The normal function of the transverse vibration equation is obtained by separating variables. The differential equations for the beam that consider moments of inertia, shearing effects, and gyroscopic moments are investigated using the transfer matrix method. The deflection and vibration frequencies of the discontinuous beam are studied under different axial loads and connection spring stiffness. Results show that deflection decreases and vibration frequencies increase exponentially with increasing connection spring stiffness. Moreover, both variables remain steady when connection spring stiffness reaches a considerable value. Lastly, an experimental study is conducted to investigate the vibration characteristics of a discontinuous beam with a curvic coupling, and the results exhibit a good match with the proposed model.

关键词： discontinuous beam     bending stiffness     transverse vibration     axial loads     gyroscopic moments    

HTML PDF 收藏

A new meshless approach for bending analysis of thin plates with arbitrary shapes and boundary conditions

《结构与土木工程前沿（英文）》 2022年 第16卷 第1期   页码 75-85 doi: 10.1007/s11709-021-0798-5

摘要： An efficient and meshfree approach is proposed for the bending analysis of thin plates. The approach is based on the choice of a set of interior points, for each of which a basis function can be defined. Plate deflection is then approximated as the linear combination of those basis functions. Unlike traditional meshless methods, present basis functions are defined in the whole domain and satisfy the governing differential equation for plate. Therefore, no domain integration is needed, while the unknown coefficients of deflection expression could be determined through boundary conditions by using a collocation point method. Both efficiency and accuracy of the approach are shown through numerical results of plates with arbitrary shapes and boundary conditions under various loads.

关键词： plate     bending     meshless method     collocation    

HTML PDF 收藏

growth behavior of a 170 mm diameter stainless steel straight pipe subjected to combined torsion and bending

《结构与土木工程前沿（英文）》 2021年 第15卷 第4期   页码 905-913 doi: 10.1007/s11709-021-0683-2

摘要： In a nuclear powerplant, the rotary equipment, such as a pump directly fitted with hanger in the piping system, experiences torsional and bending loads. Higher crack growth rate occurs because of this torsional load in addition to the bending load. Hence, it is necessary to study the fatigue behavior of piping components under the influence of combined torsional and bending load. In this study, experimental fatigue life evaluation was conducted on a notched stainless steel SA312 Type 304LN straight pipe having an outer diameter of 170 mm. The experimental crack depth was measured using alternating current potential drop technique. The fatigue life of the stainless steel straight pipe was predicted using experiments, Delale and Erdogan method, and area-averaged root mean square–stress intensity factor approach at the deepest and surface points of the notch. Afterward, the fatigue crack growth and crack pattern were discussed. As a result, fatigue crack growth predicted using analytical methods are in good agreement with experimental results.

关键词： fatigue life     Delale and Erdogan method     RMS–SIF approach     stainless steel     torsion and bending load     fatigue crack growth    

HTML PDF 收藏

A novel structural modification to eliminate the early coupling between bending and torsional mode shapes

Nazim Abdul NARIMAN

《结构与土木工程前沿（英文）》 2017年 第11卷 第2期   页码 131-142 doi: 10.1007/s11709-016-0376-4

摘要： In this paper, a novel structural modification approach has been adopted to eliminate the early coupling between the bending and torsional mode shapes of vibrations for a cable stayed bridge model generated using ABAQUS software. Two lateral steel beams are added to the middle span of the structure. Frequency analysis is dedicated to obtain the natural frequencies of the first eight mode shapes of vibrations before and after the structural modification approach. Numerical simulations of wind excitations are conducted for the 3D model of the cable stayed bridge with duration of 30 s supporting on real data of a strong wind from the literature. Both vertical and torsional displacements are calculated at the mid span of the deck to analyze both the bending and the torsional stiffness of the system before and after the structural modification. The results of the frequency analysis after applying lateral steel beams declared a safer structure against vertical and torsional vibrations and rarely expected flutter wind speed. Furthermore, the coupling between the vertical and torsional mode shapes has been removed to larger natural frequencies magnitudes with a high factor of safety. The novel structural approach manifested great efficiency in increasing vertical and torsional stiffness of the structure.

关键词： aeroelastic instability     structural damping     flutter wind speed     bending stiffness     torsional stiffness    

HTML PDF 收藏

Analytical algorithms of compressive bending capacity of bolted circumferential joint in metro shield

《结构与土木工程前沿（英文）》   页码 901-914 doi: 10.1007/s11709-023-0915-8

摘要： The integrity and bearing capacity of segment joints in shield tunnels are associated closely with the mechanical properties of the joints. This study focuses on the mechanical characteristics and mechanism of a bolted circumferential joint during the entire bearing process. Simplified analytical algorithms for four stress stages are established to describe the bearing behaviors of the joint under a compressive bending load. A height adjustment coefficient, α, for the outer concrete compression zone is introduced into a simplified analytical model. Factors affecting α are determined, and the degree of influence of these factors is investigated via orthogonal numerical simulations. The numerical results show that α can be specified as approximately 0.2 for most metro shield tunnels in China. Subsequently, a case study is performed to verify the rationality of the simplified theoretical analysis for the segment joint via numerical simulations and experiments. Using the proposed simplified analytical algorithms, a parametric investigation is conducted to discuss the factors affecting the ultimate compressive bending capacity of the joint. The method for optimizing the joint flexural stiffness is clarified. The results of this study can provide a theoretical basis for optimizing the design and prediciting the damage of bolted segment joints in shield tunnels.

关键词： shield tunnel     segment joint     joint structural model     failure mechanism    

HTML PDF 收藏

A simplified method for investigating the bending behavior of piles supporting embankments on soft ground

《结构与土木工程前沿（英文）》   页码 1021-1032 doi: 10.1007/s11709-023-0952-3

摘要： In recent years, concrete and reinforced concrete piles have been widely used to stabilize soft ground under embankments. Previous research has shown that bending failure, particularly during rapid filling on soft ground, is the critical failure mode for pile-supported embankments. Here, we propose an efficient two-stage method that combines a test-verified soil deformation mechanism and Poulos’ solution for pile–soil interaction to investigate the bending behavior of piles supporting embankments on soft ground. The results reveal that there are three possible bending failure scenarios for such piles: at the interface between the soft and firm ground layers, at mid-depths of the fan zone, and at the boundary of the soil deformation mechanism. The location of the bending failure depends on the position and relative stiffness of the given pile. Furthermore, the effect of embedding a pile into a firm ground layer on the bending behavior was investigated. When the embedded length of a pile exceeded a critical value, the bending moment at the interface between the soft and firm ground layers reached a limiting value. In addition, floating piles that are not embedded exhibit an overturning pattern of movement in the soft ground layer, and a potential failure is located in the upper part of these piles.

关键词： bending behavior     pile     embankment     soil−structure interaction     failure mode    

HTML PDF 收藏

Erratum to: Bending and vibration of a discontinuous beam with a curvic coupling under different axial

《机械工程前沿（英文）》 2022年 第17卷 第2期 doi: 10.1007/s11465-022-0709-z

HTML PDF 收藏

Parameter prediction in laser bending of aluminum alloy sheet

WANG Xuyue, XU Weixing, CHEN Hua, WANG Jinsong

《机械工程前沿（英文）》 2008年 第3卷 第3期   页码 293-298 doi: 10.1007/s11465-008-0046-x

摘要： Based on the basic platform of BP neural networks, a BP network model is established to predict the bending angle in the laser bending process of an aluminum alloy sheet (1–2 mm in thickness) and to optimize laser bending parameters for bending control. The sample experimental data is used to train the BP network. The nonlinear regularities of sample data are fitted through the trained BP network; the predicted results include laser bending angles and parameters. Experimental results indicate that the prediction allowance is controlled less than 5%–8% and can provide a theoretical and experimental basis for industry purpose.

关键词： control     industry purpose     nonlinear     network     aluminum    

HTML PDF 收藏

软夹芯夹层梁最大弯曲正应力的计算

郝景新,刘文金,吴新凤

《中国工程科学》 2014年 第16卷 第4期   页码 92-95

摘要：

最大弯曲正应力是衡量夹层梁弯曲性能的重要参数之一，本文推导出了将软夹芯夹层梁等效成等 截面均质单层梁计算最大弯曲正应力的方法，并在此基础上进行三点弯曲试验的算例研究。结果表明：修正单层梁理论与层合梁理论计算的结果是一致的。当破坏载荷与夹层梁横截面的尺寸一定时，随着芯层与总厚度比的增加，修正单层梁理论计算的最大正应力值逐渐增加，而单层梁理论计算的结果为一恒定值。最大弯曲正应力修正公式的建立为夹层梁的工程应用提供理论基础。

关键词： 夹层梁     弯曲正应力     单层梁理论     弯曲特性    

HTML PDF 收藏

Bending performance of composite bridge deck with T-shaped ribs

Qingtian SU, Changyuan DAI, Xu JIANG

《结构与土木工程前沿（英文）》 2019年 第13卷 第4期   页码 990-997 doi: 10.1007/s11709-019-0532-8

摘要： This paper proposes a new type of steel-concrete composite deck, which is composed of orthotropic steel deck (OSD) with T-shaped ribs, concrete plate and studs connecting OSD and concrete plate. The OSD can act as framework for concrete plate and contribute to load bearing capacity at the same time, which could save construction time. Compared with conventional OSD system, this new type of composite bridge deck can also improve fatigue performance. Considering that this type of composite deck is not yet applied in practical engineering and its mechanical performance is not revealed in previous literatures, two full-scale specimens were designed and manufactured in this research. The mechanical performance, particularly, bending capacity in positive and negative region was carefully tested and analyzed. The load-deflection curve, load-slip relation, strain distribution in concrete and steel were obtained. The test results showed that the plastic performance of this kind of composite bridge deck was satisfying and the bending capacity was high.

关键词： bending performance     composite bridge deck     T-shaped steel ribs    

HTML PDF 收藏

Modal disturbance investigation of rod-shaped ultrasonic motor using bending vibrations

ZHANG Jiantao, ZHU Hua, ZHAO Chunsheng

《机械工程前沿（英文）》 2008年 第3卷 第3期   页码 343-347 doi: 10.1007/s11465-008-0058-6

摘要： Modal disturbance of a rod-shaped ultrasonic motor using bending vibrations can cause problems such as low motor efficiency, instability, and poor control. In this paper, a dynamic analysis model of a stator is created on the basis of the finite element method (FEM) and Hamilton principle. The modal frequency sensitivities of the stator to the structure parameters are investigated by modal analysis. Accordingly, the structure parameters of the stator are modified to separate working modes from disturbance modes. A rod-shaped ultrasonic motor stator is fabricated, and the experimental results of its amplitude frequency response characteristics show that the purpose of modal separation is achieved. The frequency separation between working modes and disturbance modes is more than 2 kHz. The validity of the method is verified.

关键词： Hamilton principle     disturbance     separation     frequency separation     dynamic analysis    

HTML PDF 收藏

Degree of bending of concrete-filled rectangular hollow section K-joints under balanced-axial loadings

Rui ZHAO; Yongjian LIU; Lei JIANG; Yisheng FU; Yadong ZHAO; Xindong ZHAO

《结构与土木工程前沿（英文）》 2022年 第16卷 第4期   页码 461-477 doi: 10.1007/s11709-022-0818-0

摘要： It has been found that the fatigue life of tubular joints is not only determined by the hot spot stress, but also by the stress distribution through the tube thickness represented as the degree of bending (DoB). Consequently, the DoB value should be determined to improve the accuracy of fatigue assessment for both stress-life curve and fracture mechanics methods. Currently, no DoB parametric formula is available for concrete-filled rectangular hollow section (CFRHS) K-joints, despite their wide use in bridge engineering. Therefore, a robust finite element (FE) analysis was carried out to calculate the DoB of CFRHS K-joints under balanced-axial loading. The FE model was developed and verified against a test result to ensure accuracy. A comprehensive parametric study including 190 models, was conducted to establish the relationships between the DoBs and four specific variables. Based on the numerical results, design equations to predict DoBs for CFRHS K-joints were proposed through multiple regression analysis. A reduction of 37.17% was discovered in the DoB, resulting in a decrease of 66.85% in the fatigue life. Inclusively, the CFRHS K-joints with same hot spot stresses, may have completely different fatigue lives due to the different DoBs.

关键词： fatigue assessment     K-joint     design equations     degree of bending     fracture mechanics    

HTML PDF 收藏

A novel finite element formulation for static bending analysis of functionally graded porous sandwich

Van Chinh NGUYEN; Trung Thanh TRAN; Trung NGUYEN-THOI; Quoc-Hoa PHAM

《结构与土木工程前沿（英文）》 2022年 第16卷 第12期   页码 1599-1620 doi: 10.1007/s11709-022-0891-4

摘要： This article aims to propose a finite element formulation based on Quasi-3D theory for the static bending analysis of functionally graded porous (FGP) sandwich plates. The FGP sandwich plates consist of three layers including the bottom skin of homogeneous metal, the top skin of fully ceramic and the FGP core layer with uneven porosity distribution. A quadrilateral (Q4) element with nine degrees of freedom (DOFs) per node is derived and employed in analyzing the static bending response of the plate under uniform and/or sinusoidally distributed loads. The accuracy of the present finite element formulation is verified by comparing the obtained numerical results with the published results in the literature. Then, some numerical examples are performed to examine the effects of the parameters including power-law index k and porosity coefficient ξ on the static bending response of rectangular FGP sandwich plates. In addition, a problem with a complicated L-shape model is conducted to illustrate the superiority of the proposed finite element method.

关键词： sandwich plates     functionally graded porous     static bending     Quasi-3D theory     Q4 element    

HTML PDF 收藏

Parametric equations for notch stress concentration factors of rib–deck welds under bending loading

《结构与土木工程前沿（英文）》 2021年 第15卷 第3期   页码 595-608 doi: 10.1007/s11709-021-0720-1

摘要： The effective notch stress approach for evaluating the fatigue strength of rib–deck welds requires notch stress concentration factors obtained from complex finite element analysis. To improve the efficiency of the approach, the notch stress concentration factors for three typical fatigue-cracking modes (i.e., root–toe, root–deck, and toe–deck cracking modes) were thoroughly investigated in this study. First, we developed a model for investigating the effective notch stress in rib–deck welds. Then, we performed a parametric analysis to investigate the effects of multiple geometric parameters of a rib–deck weld on the notch stress concentration factors. On this basis, the multiple linear stepwise regression analysis was performed to obtain the optimal regression functions for predicting the notch stress concentration factors. Finally, we employed the proposed formulas in a case study. The notch stress concentration factors estimated from the developed formulas show agree well with the finite element analysis results. The results of the case study demonstrate the feasibility and reliability of the proposed formulas. It also shows that the fatigue design curve of FAT225 seems to be conservative for evaluating the fatigue strength of rib–deck welds.

关键词： notch stress concentration factor     rib–deck weld     parametric analysis     regression analysis     parametric equation    

HTML PDF 收藏

标题 作者 时间 类型 操作

Improved prediction of pile bending moment and deflection due to adjacent braced excavation

期刊论文

Bending and vibration of a discontinuous beam with a curvic coupling under different axial forces

Heng LIU, Jie HONG, Dayi ZHANG

期刊论文

A new meshless approach for bending analysis of thin plates with arbitrary shapes and boundary conditions

期刊论文

growth behavior of a 170 mm diameter stainless steel straight pipe subjected to combined torsion and bending

期刊论文

A novel structural modification to eliminate the early coupling between bending and torsional mode shapes

Nazim Abdul NARIMAN

期刊论文

Analytical algorithms of compressive bending capacity of bolted circumferential joint in metro shield

期刊论文

A simplified method for investigating the bending behavior of piles supporting embankments on soft ground

期刊论文

Erratum to: Bending and vibration of a discontinuous beam with a curvic coupling under different axial

期刊论文

Parameter prediction in laser bending of aluminum alloy sheet

WANG Xuyue, XU Weixing, CHEN Hua, WANG Jinsong

期刊论文

软夹芯夹层梁最大弯曲正应力的计算

郝景新,刘文金,吴新凤

期刊论文

Bending performance of composite bridge deck with T-shaped ribs

Qingtian SU, Changyuan DAI, Xu JIANG

期刊论文

Modal disturbance investigation of rod-shaped ultrasonic motor using bending vibrations

ZHANG Jiantao, ZHU Hua, ZHAO Chunsheng

期刊论文

Degree of bending of concrete-filled rectangular hollow section K-joints under balanced-axial loadings

Rui ZHAO; Yongjian LIU; Lei JIANG; Yisheng FU; Yadong ZHAO; Xindong ZHAO

期刊论文

A novel finite element formulation for static bending analysis of functionally graded porous sandwich

Van Chinh NGUYEN; Trung Thanh TRAN; Trung NGUYEN-THOI; Quoc-Hoa PHAM

期刊论文

Parametric equations for notch stress concentration factors of rib–deck welds under bending loading

期刊论文